FREE SHIPPING WORLDWIDE

how to use your
beyond blender

Beyond blender was designed to be super simple.
Check out these tips to maximize your blend!

High five! Your beyond blender is partly charged so charge it for 3 hours before using it and give it a quick clean. Simply add water & a drop of soap, turn on for 1 cycle or 2 and voila! Squeaky clean and ready to use!

Always start by adding a liquid (like water, milk, or juice). This will make blending easy. This applies for blending or crushing ice too!

After you’ve added your liquid, toss in the rest of your ingredients and blend! Simply click the power button and whizz!

For maximum power, turn the blender upside down and allow the blades to turn up to their full RPMs before blending. You can do a little dance while you're at it!

Cutting your fruits or other ingredients into small chunks will result in the smoothest blend! So make sure you do that.

Yes, you can do just that. Make sure to add some liquid first, add the ice last, and start crushing!

Our built-in strainer helps keep chunks and clunks off your beverages for easy pouring & drinking.

Just like everything else in life. Too much is never good. Leave a little room in there, don't overload it.

We do not recommend that. Pouring hot liquids that are over 120° F / 49°C may cause damage & leaks. Keep things cool, shall we?

To avoid burning the lovely motor, let’s not run the blender while it’s empty. We’re sure you want to keep your beyond blender happy & healthy :)

Never ever put your fingers or hands inside the blender or try to touch the blades while it’s running. Totally not recommended.

There are magnets in the jar & base machine which must be aligned in order for the blades to spin. Tighten up your jar and position the arrow on the front of it until aligned with the arrow on the front of the base.

Relax. The safety feature prevents the blades from running when the jar is detached from the base machine.

It’s super easy & simple. Add lotsa water, drop of soap, blend it for couple rounds and rinse! For a more thorough clean, detach the parts and clean as normal but don’t rinse the base machine or put in the dishwasher, simply rinse the blades over running water. Avoid getting water in the charging port.

We suggest you deep clean the blender once in a while. All parts can be disassembled. There are white silicone o-rings in the lid, strainer, and base which can be removed. Rinse and clean more thoroughly and let each part fully dry.

Remove and separate the lid and strainer, and detach the jar from the base too if you’d like to let them fully air dry after cleaning.

Don't worry! Simply flip the blender upside down give it a quick shake and turn it back on. And then turn it back up so that your ingredients smash all the blades at full speed.

If that didn’t fix it, there might be chunks of stuff stuck to the blades. Flip the blender upside down and twist off the base to remove whatever has blocked it. Then, twist the base back on, align the jar and base again, and resume!

It means the jar isn't aligned to the base. Twist the jar clockwise into the base until the arrows line up and tighten it up a little, but not too much.

It means it’s time to charge, baby! You can charge your beyond blender with any USB port. Once it’s fully charged, the light will turn bright blue.

YAY I GOT MY BLENDER. NOW WHAT?

High five! Your beyond blender is partly charged so charge it for 3 hours before using it and give it a quick clean. Simply add water & a drop of soap, turn on for 1 cycle or 2 and voila! Squeaky clean and ready to use!

START WITH SOME LIQUID FIRST

Always start by adding a liquid (like water, milk, or juice). This will make blending easy. This applies for blending or crushing ice too!

LET THE BLENDING GAMES BEGIN!

After you’ve added your liquid, toss in the rest of your ingredients and blend! Simply click the power button and whizz!

HOW TO BLEND BETTER?

For maximum power, turn the blender upside down and allow the blades to turn up to their full RPMs before blending. You can do a little dance while you're at it!

HOW BIG SHOULD I CUT MY FRUITS?

Cutting your fruits or other ingredients into small chunks will result in the smoothest blend! So make sure you do that.

ADDING & BLENDING ICE

Yes, you can do just that. Make sure to add some liquid first, add the ice last, and start crushing!

THE HANDY STRAINER

Our built-in strainer helps keep chunks and clunks off your beverages for easy pouring & drinking.

FILLING YOUR CUP

Just like everything else in life. Too much is never good. Leave a little room in there, don't overload it.

POURING HOT STUFF IN

We do not recommend that. Pouring hot liquids that are over 120° F / 49°C may cause damage & leaks. Keep things cool, shall we?

RUNNING AN EMPTY BLENDER

To avoid burning the lovely motor, let’s not run the blender while it’s empty. We’re sure you want to keep your beyond blender happy & healthy :)

KEEP YOUR FINGERS OUT

Never ever put your fingers or hands inside the blender or try to touch the blades while it’s running. Totally not recommended.

JAR & BASE MAGNET ALIGNMENT

There are magnets in the jar & base machine which must be aligned in order for the blades to spin. Tighten up your jar and position the arrow on the front of it until aligned with the arrow on the front of the base.

SUPER SAFETY FEATURE

Relax. The safety feature prevents the blades from running when the jar is detached from the base machine.

CLEANING AFTER USE

It’s super easy & simple. Add lotsa water, drop of soap, blend it for couple rounds and rinse! For a more thorough clean, detach the parts and clean as normal but don’t rinse the base machine or put in the dishwasher, simply rinse the blades over running water. Avoid getting water in the charging port.

DEEP CLEANING MY BLENDER

We suggest you deep clean the blender once in a while. All parts can be disassembled. There are white silicone o-rings in the lid, strainer, and base which can be removed. Rinse and clean more thoroughly and let each part fully dry.

DRYING THE BLENDER

Remove and separate the lid and strainer, and detach the jar from the base too if you’d like to let them fully air dry after cleaning.

HELP, IT’S JAMMED

Don't worry! Simply flip the blender upside down give it a quick shake and turn it back on. And then turn it back up so that your ingredients smash all the blades at full speed.

WHAT IF IT’S STILL JAMMED?

If that didn’t fix it, there might be chunks of stuff stuck to the blades. Flip the blender upside down and twist off the base to remove whatever has blocked it. Then, twist the base back on, align the jar and base again, and resume!

WHAT DOES RED & BLUE FLASHING LIGHTS MEAN?

It means the jar isn't aligned to the base. Twist the jar clockwise into the base until the arrows line up and tighten it up a little, but not too much.

WHAT ABOUT JUST A RED LIGHT?

It means it’s time to charge, baby! You can charge your beyond blender with any USB port. Once it’s fully charged, the light will turn bright blue.